|
Re: Led frount turn signals/park lights for GMC?
Quote:
Originally Posted by Robznob11
Just so everyone is aware...in order to install these you will need to drill out the rivets that hold the lense on. They are designed so that you remove the lense and gasket. The tabs go against the face of the housing and correspond with the two holes. At this point you have two options.
1 pop rivit the panel in place, re install gaskets and lenses.
2. Place tabs against housing re install gaskets on top, te install lense. Install small screws through lens,gasket, led,housing and secure.
The main thing to remember is that the tab should go against the metal housing, gasket on top, then lense.
|
You can't pop rivet the panel in place whare you have the taps is how the light mounts to the grill.
There whare never and rivet thare the holes are threaded for the screws that mount the light.
__________________
 ( second times the charm) 71 gmc c15 307 sbc 373 rear gears positrac sm 465 trans. ( not listed on spid but is original )
94 chevy k1500 350 tbi 373 rear gears 4l60e one wheel peel. Gutless
07 gmc sierra classic rcsb 4.3 lt 5 speed w/t
04 chevy Silverado 1500 ext cab 5.3 4l60e.
81 chevy Scottsdale k10 muncie sm465 Np208 10 bolt 8.2 ( Old Green)
|