The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

198plus · 06-03-2009, 12:24 AM

Thanks for the welcome everyone.........Thought I'd share a couple pics with y'all.

This is the first engine I built for it.........It's a 355 with a set of RPM heads 2.02 valves with 64cc.......Crane cam 488-510 LIFT, 234-244 @ 0.50 lift DURATION, 112 LOBE SEP. With a 30 spline 700R trans with 2800 lockup stall.

Had this all finished with new Hot Jet coated headers....And was sitting in my garage one night and said what the hell I'll put a Big Block in it !!!!!

So here was my next engine project.......

1970 402 BBC....30 over......408ci

11.1 compression

Speed Pro ZL2328F-30 Forged Pistons....0.319 Dome

Comp Custom Grind (ROLLER CAM)..... 570/578 lift.......234/240 Duration @ 50
820 Oval Port heads 110cc......Comp roller springs

Comp Roller rockers 1.7

Lunati Full Roller Timing Set with Torrington Bearings

Edelbrock Torker 2 Intake

Quick Fuel 750 Carb.

Now I have changed my mine again and I'm in the process now of building new engine again ???????

06-03-2009, 12:24 AM	#18
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: 198Plus build by Alan's Classic Thanks for the welcome everyone.........Thought I'd share a couple pics with y'all. This is the first engine I built for it.........It's a 355 with a set of RPM heads 2.02 valves with 64cc.......Crane cam 488-510 LIFT, 234-244 @ 0.50 lift DURATION, 112 LOBE SEP. With a 30 spline 700R trans with 2800 lockup stall. Had this all finished with new Hot Jet coated headers....And was sitting in my garage one night and said what the hell I'll put a Big Block in it !!!!! So here was my next engine project....... 1970 402 BBC....30 over......408ci 11.1 compression Speed Pro ZL2328F-30 Forged Pistons....0.319 Dome Comp Custom Grind (ROLLER CAM)..... 570/578 lift.......234/240 Duration @ 50 820 Oval Port heads 110cc......Comp roller springs Comp Roller rockers 1.7 Lunati Full Roller Timing Set with Torrington Bearings Edelbrock Torker 2 Intake Quick Fuel 750 Carb. Now I have changed my mine again and I'm in the process now of building new engine again ???????