The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

LOW A D · 02-03-2016, 10:34 PM

Tackled the cowl area in front of the door. There was no gap at all, door touched the cowl. Made a pass with a thin cutoff wheel and tapped the cowl edge ahead and welded up the cut

02-03-2016, 10:34 PM	#43
LOW A D Registered User Join Date: Jun 2013 Location: Winnipeg Manitoba Posts: 177	Re: Got it one piece at a time... 51 chev Tackled the cowl area in front of the door. There was no gap at all, door touched the cowl. Made a pass with a thin cutoff wheel and tapped the cowl edge ahead and welded up the cut Attached Images