The thickness of the rotors really doesn't affect the braking bias. That is done with sizing the caliper pistons and regulating the fluid flow thru the use of a proportioning valve, either fixed or adjustable. So to answer your question, you should be fine with 1" rotors on the front and 1-1/4" on the rear. Let me know when you are ready for a set of these brackets.
Quote:
Originally Posted by Gus350
The PO of my truck put a front end out of a 84 on my 68 I will have to measure the front rotors but I beleive they are the 1 inch will have to check this weekend . My quistion is if this is the case is it okay to run 1 inch in the front and the 1 1/4 in the rear?
|