View Single Post
Old 04-11-2020, 06:02 PM   #7
67C10Step
Registered User
 
67C10Step's Avatar
 
Join Date: Jul 2019
Location: Beebe, AR
Posts: 2,379
Re: Brake Light Wiring Question

I removed my turn signal switch from the circuit to make sure all my wiring and grounding was correct. I got tired of using the meter so I pulled the battery from my lawnmower and made me up some leads for it with alligator clips. Put a 7.5 amp fuse in the hot side just in case though.

I grounded the negative side of the battery and then connected the positive to the various connections on the outgoing side of the half moon connection and checked my lights. I am sort of anal retentive and when I repaired my intermediate harness I used yellow, green, and brown wires to match. That way if when I plugged my turn signal switch back in if everything didn't work as it did before I knew the switch needed attention as well.
__________________
1967 C10
1980 Jeep CJ5
2020 Toyota 4Runner
2020 Toyota CH-R
2020 Acura MDX
67C10Step is offline   Reply With Quote