Quote:
Originally Posted by cebra
I know there were some issues with the Brothers kit (grade 5 hardware breaking and one cab support template off a 1/2") that may be resolved now but it is the reason I didn't go that route.
This takes about 4 hours to do, to me it really wasn't much more difficult or time consuming than replacing a heater core or window regulator on these trucks.
|
I used the kit in 2017 and was absolutely baffled how they went through all the process of R and D and ended up 1/2" off for the cab mount holes.
If you take out 12" then that hole moves 12" not 11 1/2"!
seriously unbelievable.
Otherwise it was super easy but certainly over priced for what it is.
Mark