Quote:
Originally Posted by 1rippen6
Seat hold down is sold with seat brackets
Front bumper is OE does have a bend under the DS light but I think it is very fixable let me know if still interested
Seat belts in this one are not original may have what you need but will have to dig it out.
I took a picture of the firewall not sure which clips you are talking about
Rubber gaskets 10 for the pair the round one was glued on so small pieces come off when removing it from the filler neck.
Transmission arms splines look good bushings on stems look good and the bronze bushings look good. 20
Just realized what you where asking for wiring harness I have some loose how many do you need will post a picture so we are on the same page.
Plus shipping on prices
|
Dwayne I will pass on the Fr Bumper.
The other items are pretty much same condition as what I have so I will refurbish my own.
For W/H clips. I need 2 of the picture you posted for the Frame rail if the rust can be media blasted off and they will survive.
The other W/H clips would be a bolt on J style that hold the Rear taillight harness in the tunnel area. Similar to what I think is bolted to the lower Pkb bolt in your firewall picture. Do you have any of those that will blast up and survive.