Re: Project "Schrum" 1959 Gmc 100
Here is a photo of the brackets at the back brace. The cable from the front mounts in the hole on the right side with a U shaped bracket. Note the spring and rod used to attach it to the pivoting flat bar. The cable runs behind the pulley on the drivers inside frame, then up to the lever on the frame near the steering box. The level is acuated by a rod that goes to the handle under the dash. I included a photo of the parts on my workbench.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
|