[sdwolff98]

ok have been up to more nefarious and cheap project to pass the time while saving a little money here and there for a windshield and computer reprogram. 1st order of businedd underhood relay power junction and also junction for the alternator battery charge wire to hook up to when it is installed. This unit I got direct from chevy for 20 bucks off a 08 hummer h2 and h3 truck. The stud in this is metric version of 3/8 more than capable of handling up to 200 or more amps off the alternator working on a mounting bracket and insulator plate with some scrap abs I have laying about. The next couple of pics are of the old heater core and fan casing assembly I am looking at converting into a cold air intake setup via the old heater air inlet hole on the firewall. Thinking will decimate a bunch more of the scrap abs floating around in the garage for this project also. Going to reuse the top sections of this unit and the bottom half will me made from the 1/4inch thick abs I have lots of extra laying around at the moment. Still looking at how to design it so it clears the ac unit hose and a few other odds n ends in the way. The mega fuse under the hood is definitely gonna have to be moved to make it all come together. Then next will be running the piping from the throttle body over to this setup I am experimenting upon lol..


Sean