My plans for this week went straight out the window on Monday night.
I finally got out to the shop at about 9 something last night. Since some of my wiring parts I have been waiting on came in yesterday, I worked on the front main harness.
Here is what I got done:
Mounted a power distribution block to the core support. This will serve as a main feed of Battery Power.
When the truck is all together, it is covered with a panel, it is easily removed for access to the block.
On the inside of the core support I mounted a 4 place terminal block. The four wires feeding it are: Pink - 12V Key On; Black - Horn Signal from Column; Tan - Low Beam Headlights from Switch; Green - High Beam Headlights from Switch.
From that block, I will run each circuit as needed to a relay for the lights and horn, the 12V Key power turns on the relay below that turns on the PCM.
Another view of that area:
In that last picture, you can see that I branched out the 12ga Red wire that provides Battery Power to the trucks fuse block. You can see the pick wire connected to the terminal strip that feeds the fuse/relay block below it.
Here you can see that I branched out the GEN light feed wire, this will go to the alternator, you can also see how I am attaching the harness to the inner fender.
Not sure what I will work on tonight, I made a list to keep track of what needs to be done. I guess I will pick something off of that to complete and get marked off...