The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

First c10 · 03-09-2020, 01:26 PM

Hey guys well trying to get back on the truck.
Built a Jig for the box to sit on while I fab up some goodies. I don't want to work on the bed while its on the frame.

I used some 3/4" Pine to mount the bed sides and use some wood and a ratchet strap to square up the bedsides to the frame rails. Next it to take a dent out of the front panel so I can get it mounted. This is mock up phase as I have a few mods I am going to do on the bedsides.
More to come!!!

03-09-2020, 01:26 PM	#928
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Hey guys well trying to get back on the truck. Built a Jig for the box to sit on while I fab up some goodies. I don't want to work on the bed while its on the frame. I used some 3/4" Pine to mount the bed sides and use some wood and a ratchet strap to square up the bedsides to the frame rails. Next it to take a dent out of the front panel so I can get it mounted. This is mock up phase as I have a few mods I am going to do on the bedsides. More to come!!! Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!