The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Outfitting 79 GMC C30 with 88-98 2wd Lift Spindles

Big-Sexy907 · 02-07-2013, 03:14 AM

Andrew, I seen that post during my search and found that most of the time the guys were using 3/4 ton parts to lift their 1/2 ton trucks. I'm curious to know if I can use the same method on a 1ton dually. In theory the front suspension components should be the same, but I'm curious to know if I'll have to swap the front rotors and calipers to that of an 88-98 dually.

I guess the way to find out would be order the lift spindles and see what happens.

02-07-2013, 03:14 AM	#3
Big-Sexy907 Registered User Join Date: Jun 2012 Location: Palmer, AK Posts: 85	Re: Outfitting 79 GMC C30 with 88-98 2wd Lift Spindles Andrew, I seen that post during my search and found that most of the time the guys were using 3/4 ton parts to lift their 1/2 ton trucks. I'm curious to know if I can use the same method on a 1ton dually. In theory the front suspension components should be the same, but I'm curious to know if I'll have to swap the front rotors and calipers to that of an 88-98 dually. I guess the way to find out would be order the lift spindles and see what happens.