Quote:
Originally Posted by Groyd
This may be a dumb question, but do the brake lights run through the wiring harness in the ABS system you deleted? If so, how did you wire up brake lights? I've been contemplating my brake situation and it looks like you did exactly what I want to do, I just am not sure how to do it. Any instruction would be helpful.
|
Nope, ABS has nothing to do with brake lights. There is a separate computer and some leads going to the ECM that have to be cut or removed...I removed them entirely and de-pinned the connectors. I used all the existing wiring going back to the taillights themselves, and used the s10 brake switch on the pedal, just re-mounted it up higher so it isn't visible. The brake switch on the pedal is what controls the on/off of the brake lights.
For the gas filler panel, you'll want to contact Infanti directly.