Re: Right turn signal broken due to loose column - SOLVED
Problem solved!
I another 1970 non tilt column that I cracked open tonight. I started looking at the mechanism and what I found was the top spring for the right turn signal when it hit the cancel cam it would bend upward instead of engage and turn off the blinker. When I looked at the older OEM blinker mechanism the springs just looked a little beefier.
After I confirmed it was working I also swapped out the upper bearings and that also took out some of the play in the wheel.
__________________
1970 GMC C1500 short fleet
Sellers Regret
- 1950 GMC
- 1967 Chevy C10
- 1970 GMC C2500 Dually Flat Bed
- 2003 Silverado
|