The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vjjack04 · 12-28-2010, 03:38 PM

Tchia65, the No Limit stuff looks really good as does the Scotts (and some others). Just a point though, the IFS I have only shares the spindles from a MS II. The rest is engineered via Scotts, it is not normall MS II track width. I noticed that the No Limit stuff uses a 2nd Gen Camaro spindle. Both use a later model Cougar rack. So really this is one's preference regarding which comany(s) to use. Should work out good either way.

12-28-2010, 03:38 PM	#12
vjjack04 Registered User Join Date: Jun 2010 Location: Bear Grass, NC Posts: 291	Re: front and rear "axle" Tchia65, the No Limit stuff looks really good as does the Scotts (and some others). Just a point though, the IFS I have only shares the spindles from a MS II. The rest is engineered via Scotts, it is not normall MS II track width. I noticed that the No Limit stuff uses a 2nd Gen Camaro spindle. Both use a later model Cougar rack. So really this is one's preference regarding which comany(s) to use. Should work out good either way. Last edited by vjjack04; 12-28-2010 at 03:41 PM.