[svr]

Ok, on the ride height i am using the original corvette rear spring with 11”
Lowering bolts set at about 10”, i might let it down a bit more at some point. I set the upper shock mounts so regular ‘88 corvette shocks fit at this ride height. On the front i just set everything so the lower A arms are about level and am happy with that look. Right now front is held up by a couple pieces of square tube while im trying to figure out what spring rate to get for the coil overs for the front. The 235 is a heavy motor.
On the wheels and tires they are American Torq Thrust II Classic’s. Fronts are 17x8 with 225/50x17 on 8” rims if I remember correct about 4” back space. Rears are 17x9.5 with 285/40x17 on the 9.5” rims and i think back space was 5.5”. Thanks