Quote:
Originally Posted by ThadandDad48
I used the rev 2 old sarg. (skymangs) body mounts. Which I thought would give a level bed with no bed depth loss, but I am using a 2001 frame so may be a little different in rear frame height. I need to take some pictures and upload so others can learn from my suffering.  |
Its a good idea to tack weld and test the height with everything together before final welding. I took my cab and front fenders apart maybe four times before finally welding the four cab mounts and the radiator mount. Only takes a couple of screws to attach the front fenders, core support, and cab enough to test adjust. Also keep in mind you'll be putting some rubber supports under the cab. Mine added 3/4" to the height measurement.