[Big John Sny]

one of my lower ball joints was bad so I decided that I should get that in line anyways before I worry about aligning it.

The new brake proportioning valve apparently has a crack in it, so the truck is down for a few days till I get a new one swapped in. (poor quality replacement parts are really starting to get me down on this truck.

Since I am pulling the lower ball joints anyways I decided to drop the lower control arm and do it on my press. And, since I was dropping the lower control arm and, I am aligning anyways, I decided, I might as well do the Caster mod and move my lower control arms forward.
I tore it all down today and I can take it and put them on the mill at work in the next day or so.

It looks like I could possibly get away with moving a half inch forward. I am at 2 inches now.