The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

1G1YY · 07-01-2018, 10:50 PM

I am doing a 350 TPI swap into my 62 and have an Autometer elec speedo.
I also have a Dakota SGI-5-E interface unit.
I am getting very confused about how to wire up the stock GM T700 VSS to the Speedo and how to connect the Interface to provide a 2000ppm signal to the stock 165 ECM.
I have spent much time researching this but cannot find a schematic for this.
Any help would be appreciated.

07-01-2018, 10:50 PM	#1
1G1YY Registered User Join Date: Dec 2016 Location: South Australia Posts: 40	wiring help needed I am doing a 350 TPI swap into my 62 and have an Autometer elec speedo. I also have a Dakota SGI-5-E interface unit. I am getting very confused about how to wire up the stock GM T700 VSS to the Speedo and how to connect the Interface to provide a 2000ppm signal to the stock 165 ECM. I have spent much time researching this but cannot find a schematic for this. Any help would be appreciated. Last edited by 1G1YY; 07-01-2018 at 10:57 PM.