Lastly, put the fans on.
I then mounted the setup to the radiator, using some of the old brackets.
Finally, test fitted the whole setup in the radiator core support. The radiator is not supported. The sheet on top is just a cover and doesn't do any support to the radiator. I am working on cutting out 1/8 metal radiator supports. It will be rudimentary, but It will work well, I think. It will work for now, and I can't be picky for the fact that it only cost me $60 bucks, for the sheet and stainless steel hardware. I tested the fans, and it pulls wayyyyy more than enough air. Each fan is rated at 1700 CFMs.
