The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

FunKing85 · 03-21-2018, 02:27 PM

Update time, Only a few years later...I've been busy since the last time I posted, here's whats been done.
-New crate 350, installed by a shop that was local to me. nothing special, just the plug and play
-New motor mount and cross member, no more nasty welded plate.
-New brakes all around, master cylinder rebuild as well. kept the old lines.
-New axle seals
-New rear tires, BFG A/T
-New Edelbrock 4 barrel carb, needs tuned.

After getting all this done, I replaced all the fluids and drove it from Florida to Oregon, where I'm working and living for the time being. I drive this truck everyday and its a full on work truck on the farm I've been working at.

03-21-2018, 02:27 PM	#39
FunKing85 Registered User Join Date: Mar 2014 Location: Merritt Island, FL Posts: 76	Re: '85 Short Bed 4X4 Update time, Only a few years later...I've been busy since the last time I posted, here's whats been done. -New crate 350, installed by a shop that was local to me. nothing special, just the plug and play -New motor mount and cross member, no more nasty welded plate. -New brakes all around, master cylinder rebuild as well. kept the old lines. -New axle seals -New rear tires, BFG A/T -New Edelbrock 4 barrel carb, needs tuned. After getting all this done, I replaced all the fluids and drove it from Florida to Oregon, where I'm working and living for the time being. I drive this truck everyday and its a full on work truck on the farm I've been working at. Attached Images __________________ Jake, Merritt Island, FL "If You're Gonna Be Dumb, You Gotta Be Tough"