The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**clay68c10** · 01-07-2024, 03:24 PM

The tank neck is 1.75” and the filler is 1.5”. I decided to run thru the crossmember with 1.5” for a smaller hole.
There was a 1.75” elbow that fit well and got me pointed in the right direction to the filler. It’s about 30deg.
The part is Spectra Premium FNH006 Fuel Tank Filler Neck Hose. It’s for a GM application, but don’t remember which.
From there it took a reducer, a section of straight hose, a section of straight tube, and a 90deg to get there.

01-07-2024, 03:24 PM	#320
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,899	Re: ClusterTruck; because that’s what it is The tank neck is 1.75” and the filler is 1.5”. I decided to run thru the crossmember with 1.5” for a smaller hole. There was a 1.75” elbow that fit well and got me pointed in the right direction to the filler. It’s about 30deg. The part is Spectra Premium FNH006 Fuel Tank Filler Neck Hose. It’s for a GM application, but don’t remember which. From there it took a reducer, a section of straight hose, a section of straight tube, and a 90deg to get there. Attached Images __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 01-07-2024 at 03:36 PM.