The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

franken · 05-24-2019, 12:56 AM

Maybe not obvious but with a sheetmetal pan/cover (1/4" bolts), I think I'd use a nut driver to tighten the bolts so as not to distort the pan, and not shear off a bolt.

05-24-2019, 12:56 AM	#17
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,055	Re: th350 pan gasket change Maybe not obvious but with a sheetmetal pan/cover (1/4" bolts), I think I'd use a nut driver to tighten the bolts so as not to distort the pan, and not shear off a bolt.