The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Wolfinthesnow · 03-09-2012, 03:57 PM

Here are the mounts I made for my nailhead. 3/16 flat plate, for the bases. The channel on the block mount is cut from 2x3x3/16 tubing and the frame mounts are 3/16 flat plate, broke into 3" channel.
Name: Nailhead Mount.jpg
Views: 1001
Size: 48.6 KB

Name: Nailhead Mount.jpg
Views: 1001
Size: 48.6 KB

Name: Nailhead5.jpg
Views: 1007
Size: 51.5 KB

Tacked together.
Name: Nailhead2.jpg
Views: 994
Size: 45.0 KB

Name: Nailhead4.jpg
Views: 986
Size: 43.7 KB

03-09-2012, 03:57 PM	#9
Wolfinthesnow I put the laughter n slaughter Join Date: Feb 2008 Location: Plant City, Fl Posts: 172	Re: My "64 GMC Build Thread Here are the mounts I made for my nailhead. 3/16 flat plate, for the bases. The channel on the block mount is cut from 2x3x3/16 tubing and the frame mounts are 3/16 flat plate, broke into 3" channel. Tacked together. __________________ I still dont care how you did it in California!!!