ok guys, I am in the process of installing the 381 in/on the '87 sender. I have a few questions - I am not familiar with these pumps/ senders. I would really appreciate some pointers on installing them some of the following:
1- the feeder tube from 381 "butts" against inline with feeder tube from sender?
2- how do the clamps included with the 381 work?
3- the "foam" sleeve included with 381 slips over the elect. conn and hose assy. and butts against rubber sleeve on the top of 381
4- the rubber base sleeve fits the 2 tabs on bottom of 381 which pinches between circular base of sender?
5- the white filter with steel ring slips over the circular bottom portion of 381
the gap between 381tube and sender tube appears to be about 1/8"
??
I assume the electric conn to pump is able to be submerged right?
what keeps the filter attached to bottom of pump - if that is where it goes?
sorry for the silly questions I am just not familiar with these parts before...
thank you in advance