As promised...
Well, they say a picture is worth a thousand words. My apologies to the dial-ups… following are about 10,000 words.
This first set of pics shows the A1 regulator and the Auto-loc crank switch. I fabricated a couple of plates to mount the switches directly to the regulators. There is just enough room for the switch to fit in the right position without the regulator gear hitting it at full extension. There is also just enough space for the switch between the regulator and the vent window channel. Luckily, The spade connectors for the wiring ended up facing forward in the perfect orientation. I had to shim the switch on the regulator slightly to set the switch shaft perpendicular to the door; otherwise it wants to point down a little bit.
__________________
71 Blazer / GMPP ZZ383 / MPFI / 700R4 / 4-Wheel Disk / Ground-up frame off almost completed resto-mod
|