Quote:
Originally Posted by WorldsCrappiestTruck
Looks great. I have that same front brake kit, and the rotors hit the factory lower control arm (front crossmember). Give a search on the boards - many have had the same issue.
While you have it apart, make sure to test fit everything and look for interference on the rotor - you’ll likely need to grind down the outer face of the lower control arm.
I did start to see some commentary on different / taller ball joints from square bodies that might help in some manner, but I opted to clearance things.
Diggin’ the patina - did the same on this end.
|
Thanks for the heads up. Still havent recieved the kit yet. Got a local car show this next weekend and then it will get disassembled and cleaned up. I so much wanted to put my 2” blocks in the rear after getting the cnotches done. Haha