You can see the wire wrap used here on the brake wiring and the alternator wiring:
Here's some shots of the headlight areas, and the wire bundle for the HEI, TCC lock up, temp sender, and starter.
I completed all that by Tuesday. Wednesday I completed the rear light wiring which turned out pretty nice but I didn't get any shots of it. Only thing left to do wiring related is installing the radio, hook up the horns, electric fans, and make sure all my grounds are connected!
Here's what's next:
PUNCH LIST
Under Dash
-Radio + Aux/USB in the cig lighter + hidden antenna
-Connect dash grounds
-Check carb gets to WOT with pedal travel
-Install glove box
Interior
-Cut MLV and install under front carpet
-Finalize front carpet placement and make holes for shifter, dimmer switch, + seat bolts, seat belts
-Drill holes for: center console mounting holes and still plates
-Install tcase shifter, boot, + trim ring
Underhood
-Install radiator fluid reservoir
-Install horns
-Wire Electric Fans
Misc
Get fire extinguisher
Double check all fluids