The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TheWhiteElephant · 05-23-2011, 11:25 PM

Name: IMG_1379.jpg
Views: 4837
Size: 53.6 KB

Next is the upper ball joint...

Name: IMG_1381.jpg
Views: 4978
Size: 60.5 KB

Name: IMG_1382.jpg
Views: 5074
Size: 54.3 KB

Here I am removing the driver side lower ball joint. I used the breaker bar and my hydraulic jack handle for extra leverage. That joint was on tight but the jack handle made it a whole lot easier, and frankly, it wouldn't have been possible to do this by hand without that extra leverage.

Name: IMG_1399.jpg
Views: 4785
Size: 66.5 KB

Name: IMG_1399.jpg
Views: 4785
Size: 66.5 KB

05-23-2011, 11:25 PM	#118
TheWhiteElephant God is good! Join Date: Sep 2010 Location: Texas Posts: 689	Re: 1973 K20 Build Thread Next is the upper ball joint... Here I am removing the driver side lower ball joint. I used the breaker bar and my hydraulic jack handle for extra leverage. That joint was on tight but the jack handle made it a whole lot easier, and frankly, it wouldn't have been possible to do this by hand without that extra leverage. __________________ Mando *"It takes a smart man to know when he's stupid." -- Barney Rubble* My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=430367 Last edited by TheWhiteElephant; 05-23-2011 at 11:29 PM.