[mongocanfly]

Did a little pulling upgrade to the C30..I added a under bed winch..
It's a superwinch 9000 that I had taking up space on the shop floor,so I put it to good use
I used a 1/2" plate that bolts to the frame to mount the winch and fairlead to,
and it was just right for fairlead to sit behind the tag
So I cut out the tag plate, welded a hinge to it ,and used a couple of magnets to hold it closed
The controls plug for the winch was broke, so while searching for a new plug, I found that I could use a wireless remote for the winch..bought a cheap one off Ebay and wired it in..best winch upgrade ever..!!
I also went ahead and wired in a new plug for the remote..for those just in case moments..
Ran the power wires up the frame rails to the battery, where I added a disconnect switch so no power is at the winch until needed..
I recently put it to use when I loaded the IH travelall on the trailer..