Brake line flaring sizing help
So my oem s10 master cylinder has two different fitting sizes on the outputs. Maybe 7/16 for the front, and 3/8 for the rear.
I'm using an aftermarket adjustable proportioning block that uses all 3/16 fittings. I have 3/16 line.
My question is, can I bubble flare the 3/16 line, and use this (pic below) 3/8 fitting that seems correct, or will I have trouble with the bubble seating? Same question for the even larger 7/16, but I did find a brass adapter from 7/16 to 3/16 that should work.
|