The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**JQ-72** · 07-12-2002, 05:03 AM

The vacuum relief valve mounting bracket is different on 67-72's. This is the valve that mounts to the brake pedal that shuts the system off when you hit the brakes. Also, check out how the servo cable mounts to the carb linkage-different types. The short speedo cable (going from speedo head to transducer) may be different. I think the later 70's had a clip that held the cable in on the back of the speedo head where it screwed on in the early 70's. Hope this helps.
Joshua

07-12-2002, 05:03 AM	#4
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,539	The vacuum relief valve mounting bracket is different on 67-72's. This is the valve that mounts to the brake pedal that shuts the system off when you hit the brakes. Also, check out how the servo cable mounts to the carb linkage-different types. The short speedo cable (going from speedo head to transducer) may be different. I think the later 70's had a clip that held the cable in on the back of the speedo head where it screwed on in the early 70's. Hope this helps. Joshua