got the column mount cut and tacked, I fit it to the pedal brace but couldnt tack it for a test fit because the cab is still wrong.
so I chopped out the firewall section from the 3 window and welded it to the 5 window.
you can see I put the wiring pass through in as well.
pulled the 3 window and started loading up the trailer for the short drive east in three weeks
and rolled the truck back in, after "repairing" the drivers side cowl, the windshield frame, and everything else that this new cab gave me.
I want to get the column test fit in the morning then a lowering job on the springs. I found my two big c clamps, cant wait to see the drop I get out of the leafs.