The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**biketopia** · 12-23-2020, 04:10 PM

Are you leaving DOD in this motor? Map sensor you can put a brass nipple in the hole with the right size hose end on it and run a line to your map sensor, or if you're not running boost it will possibly be ok with one tab, or score another truck intake. Sounds like you talked yourself into a new harness. I see un touched ones pop up on FB and ls swap pages for 150 or less, or again if you have a you pull it yard, you've got a nice little shopping list going.

12-23-2020, 04:10 PM	#5
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,008	Re: Lets get this LS 5.3 running! Are you leaving DOD in this motor? Map sensor you can put a brass nipple in the hole with the right size hose end on it and run a line to your map sensor, or if you're not running boost it will possibly be ok with one tab, or score another truck intake. Sounds like you talked yourself into a new harness. I see un touched ones pop up on FB and ls swap pages for 150 or less, or again if you have a you pull it yard, you've got a nice little shopping list going. __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350