The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 72 C10 SBC 350

**Rich72C10** · 01-26-2021, 02:09 PM

Well, I dropped my baby off to the shop down the street and walked home in about 10 minutes (they are that close). The shop is highly recommended and highly reviewed. I actually remember when the shop was built about 15 or so years ago - very clean and organized. When I told them I wanted Fel-pro seals, they responded, well that's all we use. So that gave me warm and fuzzies.

Also having the TH350's pan seal replaced, it is lightly seeping fluid. After parking, I get perhaps less than 1/2 cap of fluid on my garage floor. Not bad but annoying...

01-26-2021, 02:09 PM	#4
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,643	Re: 72 C10 SBC 350 - Valve Seals (Stock) Well, I dropped my baby off to the shop down the street and walked home in about 10 minutes (they are that close). The shop is highly recommended and highly reviewed. I actually remember when the shop was built about 15 or so years ago - very clean and organized. When I told them I wanted Fel-pro seals, they responded, well that's all we use. So that gave me warm and fuzzies. Also having the TH350's pan seal replaced, it is lightly seeping fluid. After parking, I get perhaps less than 1/2 cap of fluid on my garage floor. Not bad but annoying... __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim