[Wasted Income]

Originally Posted by FRENCHBLUE72

She sure sounds great...

Thanks.

Originally Posted by Hart_Rod

Looks great! Do you have more pictures and information on your fuel rails and boost referenced fuel pressure regulator? I'm tring to figure out what I'm going to use on my 6.2L with a TVS1900 Maggie. Also, any thoughts on my cam selection:

http://www.summitracing.com/parts/cca-54-45311

TIA

They are just FAST rails with 80 lb/hr injectors. -10 feed from tank, split to two -8 lines into the back of the rails, and a single -6 return to the tank.

The regulator is just a normal off the shelf Aeromotive boost referenced regulator with dual -8 inlets and the single -6 out.








As far as the cam, that looks like a nice unit. Lift is pretty high, and will require some really good valve springs. Might also want to double check that you're getting a 1 bolt cam...that one is listed as a 3 bolt, and for use in the earlier LS engines.

Originally Posted by 82ZZZR

Is the Rotella the oil you run in that? I use it in my Charger.

Yep. I run it in everything....my duramax, my boat, all the other LS hotrods I've built. I figure if it's good enough for on-highway trucks, it's good for what abuse I put my stuff thru.