[Rufton]

Musicman70 turned me on to Napa mount which crossed to Anchor 2337 and fit perfect.
I loosely attached one mount then released hoist pressure.
Moved chain to list engine port/starboard.
Loosely attached all front motor mount bolts while listing engine back and forth.
Released hoist pressure then shot both trans mount bolts.
Applied thread locker to trans mounts and torqued to 35 ft/lbs (don't know OEM spec).
Gradually tightened front mounts while rocking engine under hoist pressure.
Dropped engine and torqued all mount bolts.

BTW: Anchor 2337 has those pesky metric threads.