Re: Putting Camaro front in 55 second gen
@Flames97
I fitted and welded my cab corners, I will have to say, they are not easy. I ended up cutting a few inches of the bottom of the inner cab corners off, to keep the water trap problem out. The best way to get the ouuters to fit was to butt weld them. I did put a 3/4 inch "backer" behind it. Now Im where you are at with the poor fitment of the rocker edge. I may get it close and call it good. It is kind of a rat rod...
Got the last seat belt mount tab welded in too!
Last edited by Dave0; 01-10-2018 at 07:20 PM.
|