The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project Vitamin C-10

Alan's Classic · 06-02-2008, 10:18 PM

Ive got the passenger side pretty much buttoned up. I've moved on to the driver side. I've been doing body work for almost 12 years and OEM panels are so much easier. There's alot of head scratching, trying to figure out the best way to get these panels in. The driver side was stamped 1/2" off. You can see how I cut around the cab mount to get the floor lined up with the A post and inner rocker. The curve of the floor did not match the curve of the floor support. I had to cut relief cuts to get it to lay down.

06-02-2008, 10:18 PM	#74
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: My 1965 build thread Ive got the passenger side pretty much buttoned up. I've moved on to the driver side. I've been doing body work for almost 12 years and OEM panels are so much easier. There's alot of head scratching, trying to figure out the best way to get these panels in. The driver side was stamped 1/2" off. You can see how I cut around the cab mount to get the floor lined up with the A post and inner rocker. The curve of the floor did not match the curve of the floor support. I had to cut relief cuts to get it to lay down. Attached Images __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"