The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**argonaut** · 02-28-2015, 02:56 AM

I would recommend retrofitting a divorced np205 from a dodge. You can find these without too much trouble. Should be fairly straight forward to make some brackets to mount in place of the t221. Front driveshaft shoukd be the same and I bet that the rear driveshaft could be reused as well even though the output is high on the np205 versus low on the t221.

02-28-2015, 02:56 AM	#13
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Rockwell t221 I would recommend retrofitting a divorced np205 from a dodge. You can find these without too much trouble. Should be fairly straight forward to make some brackets to mount in place of the t221. Front driveshaft shoukd be the same and I bet that the rear driveshaft could be reused as well even though the output is high on the np205 versus low on the t221. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!