[First c10]

Last night finished up the install of the Retrosound Stereo. Since the stereo was in and wired, speaker installed, A/C installed, wiper system installed I decided to put the Key cylinder in, fuses in and hooked up power and ground to test them out. I turned the switch turned the stereo on and it worked so CHECK, wiper motor high and low CHECK, A/C blower on CHECK.
What a great feeling to have spent this much time wiring and so far the under the dash wiring is working as planned. Now its time to check the under hood wiring, front lighting harness, rear lighting harness and LS harness wiring...