|
Re: 1940 "project moonshine"
got a little more done.we worked on adding a piece to the lower rear fenders to fill the gap.we channeled the cab 2" and raised the rear fenders about 3 1/2" so the fill in piece was about 5 1/2".we cut the bottom of the fender off and bolted it to the running board to keep everything straight.cut weld grind.next thing we worked on was the bed to running board filler piece.we started by hammering it flat and re bending it 2" taller.thought it might look weird but i think when the new metal is blended to match the fender it wont be to bad.thanks chizzler
|