The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Stickboy1968 · 03-21-2019, 12:57 PM

Can anyone tell me the fix to the positive camber problem that stems from using the 88-98 spindles on the 68 crossmember? I did all the steps and used the parts from the thread and my truck has HUGE positive camber without any shims. There was another thread that discussed this problem but no fix was explained. In my mind either I need to switch to 73-87 upper control arms and use the MOOG offset cross shaft to move the upper control arm inward or relocate the upper ball joint inward.

03-21-2019, 12:57 PM	#557
Stickboy1968 Registered User Join Date: Jul 2006 Location: Norfolk VA Posts: 1	Re: Disc Brake Upgrade Reference Thread Can anyone tell me the fix to the positive camber problem that stems from using the 88-98 spindles on the 68 crossmember? I did all the steps and used the parts from the thread and my truck has HUGE positive camber without any shims. There was another thread that discussed this problem but no fix was explained. In my mind either I need to switch to 73-87 upper control arms and use the MOOG offset cross shaft to move the upper control arm inward or relocate the upper ball joint inward.