The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68 short step · 01-03-2008, 01:28 PM

todays progress was cut out some more rusted metal... the flange that the peice was spot welded to was corroded on the bend.. so it was cut out and is gonna get a new peice..... also i started to lay down some body filler ( still need to sand it)... once i get the filler level ill prime that area and start with makeing the cab symetrical.... here are a few pics

01-03-2008, 01:28 PM	#18
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK todays progress was cut out some more rusted metal... the flange that the peice was spot welded to was corroded on the bend.. so it was cut out and is gonna get a new peice..... also i started to lay down some body filler ( still need to sand it)... once i get the filler level ill prime that area and start with makeing the cab symetrical.... here are a few pics Last edited by 68 short step; 01-10-2008 at 04:03 PM.