The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - weatherstrip question

**ThePunisher67** · 08-21-2017, 10:47 AM

I think me and CJ are both completely resealing our trucks at I know I am but mine is being completely torn apart will change some of the Suspension and I an welding a lot of the area under the carpet because seams have completely come apart. Bad spot welds by Chevy i think when they made mine. I figure 2 years and I will put about another 10k in her already put 6500 in a 500HP 383 stroker with forged crank, forged rods, forged pistons 750 Double pumper carb, cam with 6 in lift, edelbrock highrise intake, Hydrolic roller rockers, still have to buy the chrome and aluminum pulley or serpentine.

08-21-2017, 10:47 AM	#12
ThePunisher67 Junior Member Join Date: Jul 2017 Location: Sacramento California Posts: 50	Re: weatherstrip question - trim groove I think me and CJ are both completely resealing our trucks at I know I am but mine is being completely torn apart will change some of the Suspension and I an welding a lot of the area under the carpet because seams have completely come apart. Bad spot welds by Chevy i think when they made mine. I figure 2 years and I will put about another 10k in her already put 6500 in a 500HP 383 stroker with forged crank, forged rods, forged pistons 750 Double pumper carb, cam with 6 in lift, edelbrock highrise intake, Hydrolic roller rockers, still have to buy the chrome and aluminum pulley or serpentine.