Thread: Front brake routing
View Single Post
Old 09-15-2019, 05:36 PM   #5
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Thumbs up Re: Front brake routing
Quote:
Originally Posted by MACO View Post
I converted to disc on my 69 C20 last year and currently have the brake hoses coming form the back side of the A arm and held by the bracket on the cross member that was for the drum brakes. I am not to happy with this set up so I have some disc brake lines and hoses on order that will go to the front like the 71 and 72 C20. I was thinking I will make the brake line/hose bracket and tack it to the cross member in the front like the 71 to 72 has.

This is what I have found so far. I may buy a set and bolt them in are weld them. I may even cut the old ones off and tack them to the front. That way they are original's!



__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71

Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour

http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote