Quote:
Originally Posted by mongocanfly
your on track with the rear axle...side2side is good as you did it..but also triangulate the rear axle..measure across the front of the frame and find your center there...then measure from that point to each end of the axle tube..this will assure the axle is square with the frame...
all I know about multiple carbs is (trouble x # of carbs=headaches)
|
Thanks again Mongo! That makes total sense. I do it on construction projects and checked the frame for square when I started the project but didnt consider it for the axle. Any thoughts on whether it is measured while on jacks or should it be wheels on the ground?
Thanks1