Quote:
Originally Posted by Asshat
Thanks.
What do you need to wire? The overdrive solenoid?
|
The solenoid, the governor, the relay to energize the system, the kickdown switch, and an additional relay if you are running an HEI. There's also a lockout cable that goes into the dash so you can lock out the overdrive if desired. On my truck, it has a factory dash knob in the location closest to the steering column on the left side.
If you have a 4 speed right now, you would need to find a 3 speed floor shifter for the overdrive or swap out your steering column for a 3 on the tree
__________________
Christian Carpenter
1963 C10 -
Frankentruck 283, 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer -
Half-Wit
1981 C10 -
Penny 305, th350
1995 Dodge Dakota Sport
"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson