The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

RThree · 09-02-2014, 01:16 PM

Well we are under way! We took the front end out(anybody need a 3/4 2wd front end?) and welded up the 2wd holes in the frame this weekend! The whole bottom is covered in thick undercoating (probably a big part of why the truck is in such good shape) but I'm going to grind it all of the frame to paint it nice. I found that applying heat makes it much easier to remove.

09-02-2014, 01:16 PM	#18
RThree Registered User Join Date: Jun 2014 Location: Santa Rosa, CA Posts: 124	Re: '72 K/30 Longhorn Conversion Well we are under way! We took the front end out(anybody need a 3/4 2wd front end?) and welded up the 2wd holes in the frame this weekend! The whole bottom is covered in thick undercoating (probably a big part of why the truck is in such good shape) but I'm going to grind it all of the frame to paint it nice. I found that applying heat makes it much easier to remove. Attached Images __________________ - 1972 K20 Longhorn, 4wd conversion. "TAWNKAA" Project. 292ci Inline 6 / '93 NV4500 / 32 spline 205 TC / Dana 60s front & back / rear Detroit Locker / 4.10 Gears / 35" BFG MT KM2 / 4" Tuff Country lift. "TAWNKAA"Build Thread http://67-72chevytrucks.com/vboard/s....php?p=6823933 - 1970 C10 Lonbed, 292ci Inline 6, 3 on the tree, stock.