[reaper71]

Pic #1 The passenger side rocker set in place and looking pretty good and ready for final install.

Pic #2. The 2nd view, everything is lined up pretty nice.

Pic #3. All welded in. I did have to do some slice & dice to get it to flow but nothing I haven't had to do with every rocker I've installed.

I will note: The B pillar had to be welded in solid before the rocker goes in to make it all solid.

Pic #4. That being said this was passenger side B pillar and the front box welded in place.

Pic #5. The Drivers side B pillar all welded up and the rocker being fit (black paint is Eastwood encapsulator)

It was a very productive day, I also set the tailgate in place for test fit and all looks pretty good so far.

Till next time ..
Mark...